23948sdkhjf

Produkter fra KTR Systems Norge AS

Tilbake til bedriftsprofilen.

Sorter etter
Side av 6

New intermediate shaft coupling from the ROTEX family

Rheine, 1 August 2022 – KTR developed a torsionally flexible intermediate shaft coupling the centre piece of which is made of high-strength aluminium ...

New high-performance spider for backlash-free servo couplin

KTR has a new spider in its product range which decisively increases the performance level of the backlash-free servo couplings type ROTEX GS with reg ...

OAC Olje-/luftkjøler fra KTR

Høyt ytende kjøler for maksimum statisk trykk på 26 bar i aluminium, samt passende til hydraulisk olje, girsmøring og smøreolje. Vifte i 12 V, 24 V, 2 ...

Bremser fra KTR

KTR leverer industribremser opp til 600.000 Nm moment bremsekraft

KTR-SI FRE with Rotex® fra KTR Systems Norge AS

Idle-rotation safety clutch (load-separating) High repeating accuracy The intelligent further development to the shear pin coupling and hydraulic over ...

KTR-SI Fre fra KTR Systems Norge AS

Idle-rotation overload system (load-separating) High repeating accuracy Flange design for the mounting of pulleys or sprockets Combination with ROTEX® ...

KTR SI Compact fra KTR Systems Norge AS

Product characteristics Backlash-free overload system up to 740 Nm Decreasing disk spring for low residual moments and high re-engagement accuracy Com ...

KTR-SI with Rotex® fra KTR Systems Norge AS

Product characterisitics Overload system up to 8.200 Nm Combination with torsionally elastic ROTEX® coupling For shaft to shaft connection Axially plu ...

KTR-SI type LT fra KTR Systems Norge AS

Product characteristics Overload system up to 8.200 Nm Available in ratchet, synchronous and failsafe design Also available as disconnecting design (l ...

KTR-SI type KT fra KTR Systems Norge AS

Product characteristics Overload system up to 8.200 Nm Available in ratchet, synchronous and failsafe design Also available as disconnecting design (l ...

KTR-SI type FT fra KTR Systems Norge AS

Product characteristics Overload system up to 8.200 Nm Available in ratchet, synchronous and failsafe design Also available as disconnecting design (l ...

SYNTEX® -NC with Radex® NC fra KTR Systems Norge AS

Combination with the torsionally stiff RADEX-NC coupling Backlash-free torque transmission Able to compensate for misalignment Compact dimensions Fini ...

SYNTEX® -NC with Toolflex® GS fra KTR Systems Norge AS

Combination with the torsionally stiff coupling TOOLFLEX • Backlash-free, torsionally stiff torque transmission • Able to compensate for misalignment ...

SYNTEX® with Rotex® GS fra KTR Systems Norge AS

Safety clutch as a shaft-to-shaft connection Combination with the backlash-free ROTEX® GS Torsionally, flexible, able to compensate for misalignment A ...

SYNTEX® -NC - Overload System fra KTR Systems Norge AS

Product characteristics Backlash-free torque transmission Light-weight design Declining spring characteristic Overload protection up to 265 Nm Large b ...

SYNTEX® with shaft coupling Rotex® GS fra KTR Systems Norge AS

Product characteristics Overload system with shaft to shaft connection Combination with backlash-free ROTEX S Torsionally flexible and displaceable Ax ...

SYNTEX® with pulley fra KTR Systems Norge AS

Product characteristics Overload system with integrated pulley Pre-finished available with set-in slipping moment Component and cost reduction by inte ...

SYNTEX® with integrated sprocket fra KTR Systems Norge AS

Product characteristics Overload system with integrated chain wheel Pre-finished available with set-in torque Standard chain wheels available from sto ...

SYNTEX® standard fra KTR Systems Norge AS

Product characteristics Overload system applicable up to 400 Nm Backlash free and torsionally stiff Available both as ratchet and synchronous design D ...

RUFLEX® with Poly-Norm® fra KTR Systems Norge AS

Product characteristics Torque limiter for shaft-to-shaft connection Torsionally flexible safety clutch being able to compensate for misalignments Axi ...

RUFLEX® with BoWex® fra KTR Systems Norge AS

Product characteristics Safety clutch as torsionally stiff double-cardanic shaft to shaft connection High displacements possible by double cardanic de ...

RUFLEX® with ROTEX® fra KTR Systems Norge AS

Product characteristics Torque limiter for shaft to shaft connections Torsionally flexible, displaceable safety clutch Axially pluggable Easy setting ...

RUFLEX® max. fra KTR Systems Norge AS

Product characteristics Torque limiter in lengthened design for assemblies with wide driving components Exact coordination with the customer´s dimensi ...

RUFLEX® with sprocket fra KTR Systems Norge AS

Product characteristics Torque limiter with integrated sprocket Available as complete structural component Possible torque adjustment requested by the ...

Resultater per side:12244896
Side av 6

Fakta om KTR Systems Norge AS

Adresse
KTR Systems Norge AS
Lahaugmoveien 81
2013 Skjetten

Region
Norge
Viken
Skedsmo

Telefon: +47 64835490

Org. nr.: NO980007456

Kontaktpersoner

Luise Luise
Ørnulf Gaarder
Tittel: Daglig leder
Direkte telefon: +47 98241063

Send til en kollega

0.19